2010 Honda Odyssey Brake Pad Thickness and Limits
2010 Honda Odyssey Brake Pad Thickness and Limits with application table, generation boundaries, verification steps, cautions and official manufacturer lookup.
Honda's 2010 Odyssey table lists new front pads at 11.0–12.0 mm and new rear pads at 9.5–10.5 mm. The service limit is 1.6 mm (0.06 in) for both front and rear friction material.
Honda's 2010 Odyssey table lists new front pads at 11.0–12.0 mm and new rear pads at 9.5–10.5 mm. The service limit is 1.6 mm (0.06 in) for both front and rear friction material.
These figures apply to the cited 2010 Odyssey 3.5L brake specification. Later electronic-parking-brake systems, different calipers and other generations require their own data.
Interactive 2010 Odyssey 3.5L specification guide
STAR PATTERN
Branded downloads includedPNG and PDF exports carry the TorqueSheet logo, torquesheet.com, source-page URL, and republishing attribution request. The PDF source link is clickable.
Use this visual as an orientation aid. The exact VIN, engine, trim and manufacturer document control the specification.
Honda Odyssey Brake Pad Thickness Specs
| APPLICATION / ITEM | SPECIFICATION | NOTES |
|---|---|---|
| Front new thickness | 11.0–12.0 mm | 0.43–0.47 in |
| Front service limit | 1.6 mm | 0.06 in |
| Rear new thickness | 9.5–10.5 mm | 0.37–0.41 in |
| Rear service limit | 1.6 mm | 0.06 in |
Measure each inner and outer pad at the thinnest friction-material point, excluding the backing plate. Uneven wear can identify frozen slide pins, piston trouble or mounting problems and should not be averaged away.
Measure all eight pads, not one convenient outer pad
Honda separates front and rear new thickness but gives both axles the same 1.6-mm service limit. Measure the friction lining only at the thinnest point on each inner and outer pad; the steel backing plate is not part of the reading.
Inner pads can wear faster when slide pins or pistons do not move freely. Record the measurements by wheel and position. A large side-to-side or inner-to-outer difference is diagnostic information, not a value to average.
Thickness is only one replacement criterion
Replace pads that are cracked, separated, oil- or brake-fluid-contaminated, or severely tapered even above 1.6 mm. Inspect rotor thickness and condition, caliper boots, slides and hose routing at the same time.
The limit is not an ideal planning target. Braking duty, towing, hills and driving conditions change wear rate, so schedule service with usable margin and follow the exact bedding procedure for the installed pad and rotor combination.
Application boundaries for 2010 Odyssey 3.5L
These figures apply to the cited 2010 Odyssey 3.5L brake specification. Later electronic-parking-brake systems, different calipers and other generations require their own data.
Measure each inner and outer pad at the thinnest friction-material point, excluding the backing plate. Uneven wear can identify frozen slide pins, piston trouble or mounting problems and should not be averaged away.
Honda 2010 Odyssey 3.5L specifications can change by model year, engine, platform, wheel, and installed component. Confirm the VIN or engine identity, part numbers, fastener condition, and the current manufacturer instructions before service.
Procedures used with this specification
These steps are the same for every vehicle in this family, so they are documented once rather than repeated on each page. The values above remain specific to this Honda 2010 Odyssey 3.5L.
2010 Honda Odyssey Brake Pad Thickness and Limits FAQs
How thick are new 2010 Odyssey front pads?+
Honda lists 11.0–12.0 mm.
How thick are new rear pads?+
The listed rear range is 9.5–10.5 mm.
What is the brake-pad service limit?+
1.6 mm (0.06 inch) at both front and rear for the covered 2010 application.
Should uneven pads be averaged?+
No. Use the thinnest usable point and investigate caliper, slide or mounting problems causing uneven wear.
Technical sources
TorqueSheet favors engine- and component-specific manufacturer instructions over unsourced universal values.
1Honda service informationOfficial Honda and Acura service publication lookup.↗