Fluid CapacitiesDirect source linked

2024 Toyota Crown Oil Capacity: 2.5L vs. Hybrid MAX

2024 Toyota Crown Oil Capacity: 2.5L vs. Hybrid MAX with application chart, generation boundaries, verification steps and official manufacturer lookup.

Sources researched August 21, 2026·2 source references·Print-friendly
Direct source linkedAt least one application-specific manufacturer or component document is linked.How TorqueSheet prepares references
QUICK ANSWER

For the 2024 North American Crown, the 2.5L A25A-FXS hybrid uses 4.5 US qt (4.3 L) with filter, while the 2.4L turbo T24A-FTS Hybrid MAX uses 5.6 US qt (5.3 L) with filter.

Application note: These figures apply to the 2024 U.S./Canada Crown crossover sedan and must be matched by engine code. They do not cover the Crown Signia, older imported Crown generations, Japanese-market body styles or another Toyota that happens to use a related engine.

For the 2024 North American Crown, the 2.5L A25A-FXS hybrid uses 4.5 US qt (4.3 L) with filter, while the 2.4L turbo T24A-FTS Hybrid MAX uses 5.6 US qt (5.3 L) with filter.

These figures apply to the 2024 U.S./Canada Crown crossover sedan and must be matched by engine code. They do not cover the Crown Signia, older imported Crown generations, Japanese-market body styles or another Toyota that happens to use a related engine.

2024 Toyota Crown Oil Capacity: 2.5L vs. Hybrid MAX — TorqueSheet technical feature image
TorqueSheet technical reference artwork · torquesheet.com
Orientation aid only. Match the VIN, engine, trim and manufacturer document before use.
WORKBENCH VIEW

Interactive 2024 Crown specification guide

SELECTED1Position 1 of 5
TS

Branded downloads includedPNG and PDF exports carry the TorqueSheet logo, torquesheet.com, source-page URL, and republishing attribution request. The PDF source link is clickable.

Orientation aid only. Match the VIN, engine, trim and manufacturer document before use.

REFERENCE TABLE

Toyota Crown Oil Capacity Specs

APPLICATION / ITEMSPECIFICATIONNOTES
2024 XLE/Limited 2.5L A25A-FXS4.5 US qt4.3 L with filter
2024 Platinum 2.4L T24A-FTS5.6 US qt5.3 L with filter
2.5L without filter4.2 US qt4.0 L; normal service should replace filter
2.4L without filter5.3 US qt5.0 L
2.5L oil viscositySAE 0W-8JASO GLV-1 in cited manual

The two current powertrains also use different oil specifications: the naturally aspirated 2.5L hybrid row calls for JASO GLV-1 SAE 0W-8, while the 2.4L turbo row calls for the model-year Toyota-approved grade shown in its manual. Toyota treats both capacities as drain-and-refill references. Warm the engine, shut the hybrid system off, wait about five minutes on level ground, add below the total first, then finish at the dipstick instead of forcing the whole bottle count into the crankcase.

Application boundaries for 2024 Crown

These figures apply to the 2024 U.S./Canada Crown crossover sedan and must be matched by engine code. They do not cover the Crown Signia, older imported Crown generations, Japanese-market body styles or another Toyota that happens to use a related engine.

The two current powertrains also use different oil specifications: the naturally aspirated 2.5L hybrid row calls for JASO GLV-1 SAE 0W-8, while the 2.4L turbo row calls for the model-year Toyota-approved grade shown in its manual. Toyota treats both capacities as drain-and-refill references. Warm the engine, shut the hybrid system off, wait about five minutes on level ground, add below the total first, then finish at the dipstick instead of forcing the whole bottle count into the crankcase.

!
Build-specific specifications take priority

Toyota 2024 Crown specifications can change by model year, engine, platform, wheel, and installed component. Confirm the VIN or engine identity, part numbers, fastener condition, and the current manufacturer instructions before service.

SHARED PROCEDURES

Procedures used with this specification

These steps are the same for every vehicle in this family, so they are documented once rather than repeated on each page. The values above remain specific to this Toyota 2024 Crown.

COMMON QUESTIONS

2024 Toyota Crown Oil Capacity: 2.5L vs. Hybrid MAX FAQs

How much oil does a 2024 Toyota Crown take?+

4.5 US qt (4.3 L) with filter for the 2.5L A25A-FXS hybrid, and 5.6 US qt (5.3 L) with filter for the 2.4L turbo T24A-FTS Hybrid MAX. Without a filter change the figures are 4.2 qt (4.0 L) and 5.3 qt (5.0 L).

Do the two Crown powertrains use the same oil?+

No. The naturally aspirated 2.5L hybrid row calls for JASO GLV-1 SAE 0W-8, while the 2.4L turbo row calls for the model-year Toyota-approved grade shown in its manual.

Which trims have which engine?+

The 2024 XLE and Limited use the 2.5L A25A-FXS; the Platinum uses the 2.4L T24A-FTS.

What is the correct fill procedure on a hybrid?+

Warm the engine, shut the hybrid system off, wait about five minutes on level ground, add below the total first, then finish at the dipstick rather than forcing the whole bottle count into the crankcase.

Does this cover the Crown Signia?+

No. These figures are for the 2024 U.S./Canada Crown crossover sedan and must be matched by engine code. The Crown Signia, older imported Crown generations, Japanese-market body styles and other Toyotas sharing a related engine are all outside this chart.

SOURCE TRAIL

Technical sources

TorqueSheet favors engine- and component-specific manufacturer instructions over unsourced universal values.

12024 Toyota Crown Owner's Manual — lubrication systemPrimary Toyota manual separating the 2.5L A25A-FXS hybrid and 2.4L T24A-FTS Hybrid MAX oil-capacity and viscosity rows.2Toyota owner's manualsOfficial Toyota model-year manual lookup.
SOURCES RESEARCHED · 2026-08-21

Sources shown.
Check the application.

480 reference pages.
21 vehicle makes.

Review status visible.
Every page shows its source trail.