2022 Subaru Crosstrek Hybrid Tire Pressure: Front and Rear
2022 Subaru Crosstrek Hybrid Tire Pressure: Front and Rear with application table, generation boundaries, verification steps.
Subaru specifies 36 psi for the front tires and 35 psi for the rear tires on the 2022 Crosstrek Hybrid, measured cold.
Subaru specifies 36 psi for the front tires and 35 psi for the rear tires on the 2022 Crosstrek Hybrid, measured cold.
These values apply to the 2022 U.S.-market Crosstrek Hybrid and its factory tire configuration. Gasoline Crosstrek trims, later Wilderness models, replacement wheel packages and other model years must follow their own door-pillar label.
Interactive 2022 Crosstrek Hybrid specification guide
STAR PATTERN
Branded downloads includedPNG and PDF exports carry the TorqueSheet logo, torquesheet.com, source-page URL, and republishing attribution request. The PDF source link is clickable.
Use this visual as an orientation aid. The exact VIN, engine, trim and manufacturer document control the specification.
Subaru Crosstrek Tire Pressure Specifications
| APPLICATION / ITEM | SPECIFICATION | NOTES |
|---|---|---|
| Front tire pressure | 36 psi cold | 248 kPa rounded |
| Rear tire pressure | 35 psi cold | 241 kPa rounded |
| Final authority | Driver-side pressure label | Confirms the installed factory package |
| Hot-tire adjustment | Do not bleed to cold target | Recheck after cooling |
Check before driving or after the vehicle has been parked long enough for the tires to cool. Do not bleed pressure from a warm tire to force it down to the cold target, and do not use the maximum molded into the tire sidewall as the vehicle setting. The driver-side pressure label remains the quickest VIN-specific confirmation.
Application boundaries for 2022 Crosstrek Hybrid
These values apply to the 2022 U.S.-market Crosstrek Hybrid and its factory tire configuration. Gasoline Crosstrek trims, later Wilderness models, replacement wheel packages and other model years must follow their own door-pillar label.
Check before driving or after the vehicle has been parked long enough for the tires to cool. Do not bleed pressure from a warm tire to force it down to the cold target, and do not use the maximum molded into the tire sidewall as the vehicle setting. The driver-side pressure label remains the quickest VIN-specific confirmation.
Subaru 2022 Crosstrek Hybrid specifications can change by model year, engine, platform, wheel, and installed component. Confirm the VIN or engine identity, part numbers, fastener condition, and the current manufacturer instructions before service.
Procedures used with this specification
These steps are the same for every vehicle in this family, so they are documented once rather than repeated on each page. The values above remain specific to this Subaru 2022 Crosstrek Hybrid.
2022 Subaru Crosstrek Hybrid Tire Pressure: Front and Rear FAQs
What tire pressure does a 2022 Subaru Crosstrek Hybrid use?+
36 psi front and 35 psi rear, measured cold — roughly 248 kPa and 241 kPa.
Do gasoline Crosstrek trims use the same pressures?+
Not necessarily. These values are for the 2022 U.S.-market Crosstrek Hybrid and its factory tire configuration. Gasoline trims, later Wilderness models, replacement wheel packages and other model years follow their own door-pillar label.
Should I use the pressure printed on the tire sidewall?+
No. The sidewall figure is the tire's maximum, not the vehicle's setting. Use the Subaru specification or the driver-side pressure label.
What if I check the pressure after driving?+
Check before driving, or after the car has been parked long enough for the tires to cool. Do not bleed pressure out of a warm tire to force it down to the cold target — recheck once it has cooled instead.
Technical sources
TorqueSheet favors engine- and component-specific manufacturer instructions over unsourced universal values.
12022 Subaru Crosstrek Hybrid Getting Started Guide — tire inflationPrimary Subaru guide listing 36 psi front and 35 psi rear, cold, for the 2022 Crosstrek Hybrid.↗