2013 Subaru BRZ Wheel Nut Torque: 120 N-m
2013 Subaru BRZ Wheel Nut Torque: 120 N-m with application chart, generation boundaries, verification steps and official manufacturer lookup.
Subaru specifies 120 N·m, approximately 89 lb-ft, for the wheel nuts on the covered 2013 BRZ with factory wheels and original-style hardware.
Subaru specifies 120 N·m, approximately 89 lb-ft, for the wheel nuts on the covered 2013 BRZ with factory wheels and original-style hardware.
The exact value is anchored to the 2013 BRZ factory service specification. Later BRZ generations should be checked in their model-year information, while aftermarket wheels, extended studs and changed nut-seat geometry follow the wheel or hardware maker's instructions.
Clean rust and debris from the hub and wheel mounting faces, keep the studs and nut seats dry unless Subaru explicitly directs otherwise, hand-start every nut and tighten in several opposite-side passes. Finish all five positions at the same 120-N·m setting with a calibrated torque wrench.
Interactive 2013 Subaru BRZ specification guide
STAR PATTERN
Branded downloads includedPNG and PDF exports carry the TorqueSheet logo, torquesheet.com, source-page URL, and republishing attribution request. The PDF source link is clickable.
Orientation aid only. Match the VIN, engine, trim and manufacturer document before use.
Subaru Brz Wheel Torque Specs
| APPLICATION / ITEM | SPECIFICATION | NOTES |
|---|---|---|
| Wheel nut torque | 120 N·m | Approximately 89 lb-ft |
| Tightening pattern | Five-lug star | Opposite-side staged passes |
| Threads and seats | Clean and dry | Do not alter friction casually |
| Aftermarket wheels or studs | Manufacturer instructions | Seat and hardware may change |
Clean rust and debris from the hub and wheel mounting faces, keep the studs and nut seats dry unless Subaru explicitly directs otherwise, hand-start every nut and tighten in several opposite-side passes. Finish all five positions at the same 120-N·m setting with a calibrated torque wrench.
How to apply 120 N-m evenly
Hand-start all five nuts, snug them in an opposite-side star pattern while the wheel can still center, then finish at 120 N·m after the tire is supporting enough load to prevent rotation. Use the same calibrated setting at every position.
An impact wrench can install a nut too tightly before the torque wrench is used. If an impact is used for removal or light preliminary seating, keep the final controlled pass separate.
Mounting surfaces and replacement hardware
Remove corrosion and trapped debris from the hub and wheel faces so the wheel sits flush. Keep the threads and tapered seats clean and in the condition Subaru specifies; lubricant changes the relationship between wrench torque and stud tension.
An aftermarket wheel can require a different seat shape, shank length or nut diameter. Verify brake clearance and load rating as well as bolt circle, and follow the wheel manufacturer if its hardware instructions supersede the factory nut arrangement.
Application boundaries for 2013 Subaru BRZ
The exact value is anchored to the 2013 BRZ factory service specification. Later BRZ generations should be checked in their model-year information, while aftermarket wheels, extended studs and changed nut-seat geometry follow the wheel or hardware maker's instructions.
Clean rust and debris from the hub and wheel mounting faces, keep the studs and nut seats dry unless Subaru explicitly directs otherwise, hand-start every nut and tighten in several opposite-side passes. Finish all five positions at the same 120-N·m setting with a calibrated torque wrench.
Subaru 2013 Subaru BRZ specifications can change by model year, engine, platform, wheel, and installed component. Confirm the VIN or engine identity, part numbers, fastener condition, and the current manufacturer instructions before service.
Procedures used with this specification
These steps are the same for every vehicle in this family, so they are documented once rather than repeated on each page. The values above remain specific to this Subaru 2013 Subaru BRZ.
2013 Subaru BRZ Wheel Nut Torque: 120 N-m FAQs
What is the 2013 Subaru BRZ wheel-nut torque?+
Subaru specifies 120 N·m, approximately 89 lb-ft.
What tightening pattern should be used?+
Use progressive opposite-side passes in a five-lug star pattern.
Can an impact wrench provide the final torque?+
Use a calibrated torque wrench for the final pass at every nut.
Do aftermarket BRZ wheels always use 120 N-m?+
No. Confirm the replacement wheel's seat geometry and hardware instructions.
Technical sources
TorqueSheet favors engine- and component-specific manufacturer instructions over unsourced universal values.
1Subaru owner's informationOfficial Subaru model-year/VIN manual lookup.↗