2005 Dodge Ram 5.7 HEMI Flywheel and Flexplate Torque
2005 Dodge Ram 5.7 HEMI Flywheel and Flexplate Torque with fastener-group distinctions, installation cautions, application limits and official source lookup.
For the covered 2005 Ram 1500 5.7L HEMI, automatic-transmission flexplate retaining bolts use 70 lb-ft (95 N·m). The manual-transmission flywheel-to-crankshaft bolts use a separate 55 lb-ft (75 N·m) specification.
For the covered 2005 Ram 1500 5.7L HEMI, automatic-transmission flexplate retaining bolts use 70 lb-ft (95 N·m). The manual-transmission flywheel-to-crankshaft bolts use a separate 55 lb-ft (75 N·m) specification.
These two rows apply to the documented 2005 Ram 1500 production joints after transmission type is confirmed. Heavy-duty dual-mass flywheels, later eight-speed applications, replacement plates and aftermarket bolts require their corresponding procedure.
Do not average or interchange the automatic and manual values. Verify plate orientation, crank flange cleanliness, ring-gear condition and the exact bolt length, then hand-start all fasteners and tighten evenly in a crossing sequence so the plate seats flat.
Interactive 2005 Ram 1500 5.7L HEMI fastener map
Branded downloads includedPNG and PDF exports carry the TorqueSheet logo, torquesheet.com, source-page URL, and republishing attribution request. The PDF source link is clickable.
Orientation aid only. Match every position and stage to the exact service diagram.
Dodge 5.7 Hemi Flywheel Torque Spec
| APPLICATION / ITEM | SPECIFICATION | NOTES |
|---|---|---|
| Automatic flexplate retaining bolts | 70 lb-ft | 95 N·m |
| Manual flywheel to crankshaft | 55 lb-ft | 75 N·m |
| Torque-converter fasteners | Separate joint | Use transmission-specific procedure |
| Dual-mass flywheel | Different hardware | Do not transfer light-duty chart |
Do not average or interchange the automatic and manual values. Verify plate orientation, crank flange cleanliness, ring-gear condition and the exact bolt length, then hand-start all fasteners and tighten evenly in a crossing sequence so the plate seats flat.
How to use this specification correctly
- 01
Identify the exact engine, component, fastener size and hardware instructions.
- 02
Clean and inspect threads and mating faces; apply only the specified lubricant or sealant.
- 03
Tighten in gradual balanced passes and verify any angle, cure-time or recheck instruction.
Transmission type changes the answer
The automatic flexplate retaining bolts use 70 lb-ft, while the manual flywheel-to-crankshaft bolts use 55 lb-ft in the covered 2005 Ram 1500 data. Select the row by the actual transmission and rotating parts, not by the shared 5.7L engine badge.
Torque-converter bolts attach to the flexplate but are not flexplate retaining bolts. Keep that downstream joint on its own transmission-specific specification.
Plate seating, balance and bolt checks
Clean the crank flange and plate mating face, inspect the ring gear and verify orientation and balance before starting every correct-length bolt by hand. Tighten progressively in a crossing pattern so rust, a burr or a cocked plate cannot hide behind a final wrench reading.
Heavy-duty dual-mass assemblies and aftermarket flywheels can add an adapter, different bolts or another clamp specification. Follow the matched component instructions instead of combining one part's torque with another part's lubricant.
Application boundaries for 2005 Ram 1500 5.7L HEMI
These two rows apply to the documented 2005 Ram 1500 production joints after transmission type is confirmed. Heavy-duty dual-mass flywheels, later eight-speed applications, replacement plates and aftermarket bolts require their corresponding procedure.
Do not average or interchange the automatic and manual values. Verify plate orientation, crank flange cleanliness, ring-gear condition and the exact bolt length, then hand-start all fasteners and tighten evenly in a crossing sequence so the plate seats flat.
Dodge 2005 Ram 1500 5.7L HEMI specifications can change by model year, engine, platform, wheel, and installed component. Confirm the VIN or engine identity, part numbers, fastener condition, and the current manufacturer instructions before service.
2005 Dodge Ram 5.7 HEMI Flywheel and Flexplate Torque FAQs
What is the 2005 Ram 5.7 HEMI flexplate bolt torque?+
The automatic-transmission flexplate retaining bolts use 70 lb-ft (95 N·m).
What is the manual flywheel bolt torque?+
The covered flywheel-to-crankshaft bolts use 55 lb-ft (75 N·m).
Are torque-converter bolts tightened to 70 lb-ft?+
Do not assume so; they form a separate joint governed by the exact transmission procedure.
Does a dual-mass flywheel use this light-duty chart?+
Not automatically. Its adapter and flywheel fasteners can have separate specifications.
Technical sources
TorqueSheet favors engine- and component-specific manufacturer instructions over unsourced universal values.
1Mopar vehicle informationOfficial Dodge, Ram, Chrysler and Jeep model-year information lookup.↗